About our rooflights
Our rooflights as standard feature 32mm DGU (slimglaze use 28mm) toughened safety glass with low-e coating and warm edge spacer. The low-e coating allows the suns natural heat (solar gain) to pass through the panes then the low-e coating reflects the heat gain back into the room, which is more energy efficient. The warm edge spacer is made of an insulating plastic composite material that becomes a barrier to heat loss, keeping the edge of the unit warm, resulting in less heat loss. The glass specification for walk on/man safe rooflights is determined by the size & loading requirements.
Thermally broken rooflights are manufactured from our own 6063-T6 aluminium profile, thermally broken with 32mm polyamide insulation sections to prevent cold bridging and stop condensation. Slimglaze frames are non thermally broken and are RAL 7015 dark grey (matt) as standard. On other rooflights listed frames are dual colour, coated with marine grade polyester powder coating; supplied in dark grey (RAL 7015) externally and white (RAL 9010) internally, as standard. All rooflights come factory glazed, as one unit for ease of installation, for the best easy to fit solution include our upstand which will give you the correct fall angle required.
Our rooflights can be fully customised with various glazing options; finishes vary and can sometimes be utilised in multiple combinations. You may wish for the glass to be etched or obscured for added privacy or environmental impact. Perhaps coated for light / heat transmission properties and maintenance advantages. Or even annealed, anti-reflective, ceramic frit / enamelled, fused, opaque, patterned, polished, sand-blasted, self-cleaning, tinted etc…the options within glass specifications are endless. The only limitation is your imagination. You could also upgrade and choose the external frame colour from a variety of RAL colours.
The thermally broken rooflight range is fully tested to the CWCT guidelines (excludes Slimglaze) (in accordance with the latest BS EN standards) for; air permeability, water tightness & wind resistance. Achieving the highest classifications possible – for full details, please view the test report in the ‘Tech Spec & Download’ area of each rooflight. Ideal for installation on flat roofs, but can also be used on sloped roofs up to a pitch of 30 degrees. Slimglaze maximum incline is 14 degrees.
We also offer a full installation service.
Our nationwide, dedicated delivery service means your rooflight(s)will be delivered efficiently and safely to your site.
Delivery prices shown cover UK mainland only, to arrange delivery to other locations, please contact us direct.
